unisonic technologies co., ltd mje3055t npn silicon transistor www.unisonic.com.tw 1 of 2 copyright ? 2009 unisonic technologies co., ltd qw-r203-011.c high voltage transistor ? description the utc mje3055t is designed for general purpose of amplifier and switching applications. lead-free: mje3055tl halogen-free: mje3055tg ? ordering information ordering number pin assignment normal lead free plating halogen free package 1 2 3 packing mje3055t-ta3-t mje3055tl-ta3-t mje3055tg-ta3-t to-220 b c e tube mje3055t-tm3-t MJE3055TL-TM3-T mje3055tg-tm3-t to-251 b c e tube mje3055t-tn3-r mje3055tl-tn3-r mje3055tg-tn3-r to-252 b c e tape reel
mje3055t npn silicon transistor unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r203-011.c ? absolute maximum ratings (t c =25 , unless otherwise specified) parameter symbol ratings unit collector-base voltage v cbo 70 v collector-emitter voltage v ceo 60 v emitter-base voltage v ebo 5 v to-220 75 w total power dissipation to-251/to-252 p d 20 w collector current i c 10 a base current i b 6 a junction temperature t j 150 storage temperature t stg -55 ~ +150 note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. ? electrical characteristics (ta=25 , unless otherwise specified) parameter symbol test conditions min typ max unit collector-emitter breakdown voltage bv ceo i c =200ma 60 v collector-base breakdown voltage bv cbo i c =10ma 70 v emitter-base breakdown voltage bv ebo i e =10ma 5 v i cbo v cb =70v 1 ma i ceo v ce =30v 700 a collector cut-off current i cex v ce =70v, v eb(off) =1.5v 1 ma emitter cut-off current i ebo v eb =5v 5 ma v ce(sat)1 i c =4a, i b =0.4a 1.1 v collector-emitter satura tion voltage (note) v ce(sat)2 i c =10a, i b =3.3a 8 v base-emitter on voltage v be(on) v ce =4v, i c =4a 1.8 v h fe1 v ce =4v , i c =4a 20 100 dc current gain (note) h fe2 v ce =4v , i c =10a 5 current gain bandwidth product f t v ce =10v, i c =0.5a, f=1mhz 2 mhz note: pulse test: pw 300 s, duty cycle 2% pulse utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
